Are you not sure which service is appropriate to answer your question? Use our handy Quick Reference Tool below to get the information you need. Once on the right page, you will find more information on the industry and the specific tools that provide you with actionable data to meet your needs.
Ready to get started?
Contact an Expert
Industries
Remediation
Petroleum Hydrocarbon Products
For more information call a service expert at 865-573-8188 or email us at [email protected].
QuantArray® - Petro
The QuantArray®-Petro can simultaneously detect and quantify over 20 different gene targets related to petroleum hydrocarbon degradation within a single sample. Because the suite includes gene targets responsible for both aerobic and anaerobic biodegradation of BTEX, PAHs, and a variety of short and long chain alkanes, it helps to remove any guesswork in site cleanup decision making. Learn More
Stable Isotope Probing (SIP)
In a single test, conclusively determine whether in situ biodegradation of a specific contaminant has occurred. A Bio-Trap® amended with a 13C “labeled” contaminant (e.g., 13C benzene) is deployed in an impacted monitoring well and the label can be detected in the end products of biodegradation – microbial biomass and CO2. Learn More
QuantArray®-NSZD
Within a single analysis, QuantArray®-NSZD quantifies over 20 different gene targets related to the microorganisms, processes and enzymes involved in Natural Source Zone Depletion of light non-aqueous phase petroleum hydrocarbons. Learn More
Bio-Trap®
Bio-Trap® samplers are passive sampling tools that collect microbes over time for a better understanding of biodegradation potential. Bio-Traps® are only sold with analysis and can be analyzed for any molecular biological tool available at MI. Learn More
In Situ Microcosm Studies (ISM)
Results from laboratory microcosms do not always correlate to the field and pilot studies are too expensive to be used to screen multiple remediation approaches. In Situ Microcosms (ISMs) are field deployed microcosm units providing a multiple lines of evidence approach to remediation options evaluation. Learn More
Chlorinated Solvents Services
For more information call a service expert at 865-573-8188 or email us at [email protected].
QuantArray®-Chlor
QuantArray®-Chlor quantifies key microorganisms (e.g., Dehalococcoides, Dehalobacter, etc.) and functional genes (e.g., vinyl chloride reductase, methane monooxygenase, etc.) to assess potential for reductive dechlorination and aerobic cometabolism of a range of chlorinated solvents. Learn More
DHC + Functional
Use CENSUS® qPCR as an indispensable component of site assessment, remedy selection, and performance monitoring at chlorinated solvent sites around the world. Measure Dehalococcoides mccartyi to verify the potential for complete anaerobic dechlorination of chlorinated ethene compounds to ethene. Learn More
QuantArray®-BGC
In a single analysis, QuantArray®-BGC quantifies a broad spectrum of microorganisms and genes involved in biogeochemical processes related to the redox ladder and mineral cycling. Identify the potential for the in situ formation of minerals that abiotically degrade the contaminants of concern. Learn More
Min-Trap®
Use the Min-Trap® sampler to cost-effectively collect direct mineralogical data passively without the need to drill for soil samples. Monitor the formation of reactive iron minerals for abiotic degradation of chlorinated solvents or determine the area of impact from a zero-valent iron injection. Learn More
Bio-Trap®
Bio-Trap® samplers are passive sampling tools that collect microbes over time for a better understanding of biodegradation potential. Bio-Traps® are only sold with analysis and can be analyzed for any molecular biological tool available at MI. Learn More
In Situ Microcosm Studies (ISM)
Results from laboratory microcosms do not always correlate to the field and pilot studies are too expensive to be used to screen multiple remediation approaches. In Situ Microcosms (ISMs) are field deployed microcosm units providing a multiple lines of evidence approach to remediation options evaluation. Learn More
1,4 Dioxane Services
For more information call a service expert at 865-573-8188 or email us at [email protected].
Census®
Use this qPCR tool to track 4 different genes related to the degradation of 1,4-Dioxane, letting you know if the potential for cometabolic degradation of 1,4 dioxane is present at this location. Learn More
Stable Isotope Probing (SIP)
In a single test, conclusively determine whether in situ biodegradation of a specific contaminant has occurred. A Bio-Trap® amended with a 13C “labeled” contaminant (e.g., 13C 1,4-dioxane) is deployed in an impacted monitoring well and the label can be detected in the end products of biodegradation – microbial biomass and CO2. Learn More
Bio-Trap®
Bio-Trap® samplers are passive sampling tools that collect microbes over time for a better understanding of biodegradation potential. Bio-Traps® are only sold with analysis and can be analyzed for any molecular biological tool available at MI. Learn More
PFAS Services
For more information call a service expert at 865-573-8188 or email us at [email protected].
At Microbial Insights we require the highest levels of validation before we add a new microbiological assay for bioremediation purposes. Currently there have been no conclusive microbial degraders of perfluorinated compounds, but we are monitoring the literature on PFAS biodegradation closely and are excited about the current research and future possibilities. To learn more, check out this page.
Next Generation Sequencing (NGS)
For emerging contaminants like PFAS that don’t have associated gene targets, next generation sequencing (NGS) can be useful for identifying and monitoring community shifts in impacted versus unimpacted locations demonstrating how the selective pressure of the contaminant influenced the microbial community. Learn More
Bio-Trap®
Bio-Trap® samplers are passive sampling tools that collect microbes over time for a better understanding of biodegradation potential. Bio-Traps® are only sold with analysis and can be analyzed for any molecular biological tool available at MI. Learn More
Emerging Services
For more information call a service expert at 865-573-8188 or email us at [email protected].
Next Generation Sequencing (NGS)
For emerging contaminants like PFAS that don’t have associated gene targets, next generation sequencing (NGS) can be useful for identifying and monitoring community shifts in impacted versus unimpacted locations demonstrating how the selective pressure of the contaminant influenced the microbial community. Learn More
Metagenomics
Use whole genome shotgun metagenomics to gain insight into “What microorganisms are present?” and “What are they capable of doing?”. This is a powerful tool for researching microbial applications for emerging contaminants. Learn More
Assay Design
As microbiology continues to play an increasingly important role across all industries, it’s often necessary to detect and quantify specific gene targets. Depending on the industry and application, Microbial Insights offers qPCR assay design as a service – we’ll work with you to develop the assay and then offer the target analysis through our DNA laboratory. If you need a qPCR assay developed, please reach out to [email protected] and our research and development department will get in touch. Learn More
Remote Sampling
For more information call a service expert at 865-573-8188 or email us at [email protected].
Bio-Extract™
When collecting samples, location is an important point to consider. Whether that location is a contaminated groundwater well, a pipeline segment or an asset which is miles from the nearest shoreline, you need to be able to get reliable, actionable data to help you make mission critical decisions. With Bio-Extract™, field crews can extract on site preserving the integrity of the sample, eliminating hold time considerations, and reducing the overall cost of sample collection and shipping. Learn More
FieldQuant ™
Would you like to have reliable qPCR results in the field? Bring MI on location using our new FieldQuant™ device. This portable qPCR instrument can provide actionable data within 24 hours by performing the analysis on site or in your hotel room after a day of sampling. This allows decisions to be made in real time using MI’s own highly validated assays that you already use and love. In addition, the remaining DNA will be sent back to the laboratory for long term preservation and archiving, allowing you to analyze for additional qPCR targets even a year down the road. Learn More
Oil and Gas
Remediation Products
For more information call a service expert at 865-573-8188 or email us at [email protected].
QuantArray® - Petro
The QuantArray®-Petro can simultaneously detect and quantify over 20 different gene targets related to petroleum hydrocarbon degradation within a single sample. Because the suite includes gene targets responsible for both aerobic and anaerobic biodegradation of BTEX, PAHs, and a variety of short and long chain alkanes, it helps to remove any guesswork in site cleanup decision making. Learn More
Stable Isotope Probing (SIP)
In a single test, conclusively determine whether in situ biodegradation of a specific contaminant has occurred. A Bio-Trap® amended with a 13C “labeled” contaminant (e.g., 13C benzene) is deployed in an impacted monitoring well and the label can be detected in the end products of biodegradation – microbial biomass and CO2. Learn More
QuantArray®-NSZD
Within a single analysis, QuantArray®-NSZD quantifies over 20 different gene targets related to the microorganisms, processes and enzymes involved in Natural Source Zone Depletion of light non-aqueous phase petroleum hydrocarbons. Learn More
Bio-Trap®
Bio-Trap® samplers are passive sampling tools that collect microbes over time for a better understanding of biodegradation potential. Bio-Traps® are only sold with analysis and can be analyzed for any molecular biological tool available at MI. Learn More
In Situ Microcosm Studies (ISM)
Results from laboratory microcosms do not always correlate to the field and pilot studies are too expensive to be used to screen multiple remediation approaches. In Situ Microcosms (ISMs) are field deployed microcosm units providing a multiple lines of evidence approach to remediation options evaluation. Learn More
Corrosion Services
For more information call a service expert at 865-573-8188 or email us at [email protected].
QuantArray® - MIC
Protect your assets and prevent MIC using QuantArray®-MIC, an advanced qPCR method which quantifies key microorganisms and functional genes responsible for MIC and oilfield souring in a single analysis. Learn More
Next Generation Sequencing (NGS)
Next Generation Sequencing (NGS) offers unprecedented insight into the potential for microbiologically influenced corrosion (MIC) and is especially powerful for monitoring community shifts before and after biocide treatments. Combined with QuantArray®-MIC, deep insight can be gained into corrosion threat assessment and protection. Learn More
Reservoir Souring
For more information call a service expert at 865-573-8188 or email us at [email protected].
QuantArray® - MIC
Protect your assets and prevent MIC using QuantArray®-MIC, an advanced qPCR method which quantifies key microorganisms and functional genes responsible for MIC and oilfield souring in a single analysis. Learn More
CENSUS®
Protect your investment by using CENSUS® qPCR to understand or prevent souring of your well. This method quantifies specific bacteria and archaea responsible for souring such as sulfate reducing bacteria and sulfate reducing archaea. Include targets like nitrate reducing bacteria when combating souring with nitrate injections. Learn More
Next Generation Sequencing (NGS)
In reservoir souring, Next Generation Sequencing (NGS) is powerful for detecting and tracking key genera related to souring as well as monitoring souring mitigation efforts. Learn More
Remote Sampling
For more information call a service expert at 865-573-8188 or email us at [email protected].
Bio-Extract™
When collecting samples, location is an important point to consider. Whether that location is a contaminated groundwater well, a pipeline segment or an asset which is miles from the nearest shoreline, you need to be able to get reliable, actionable data to help you make mission critical decisions. With Bio-Extract™, field crews can extract on site preserving the integrity of the sample, eliminating hold time considerations, and reducing the overall cost of sample collection and shipping. Learn More
FieldQuant ™
Would you like to have reliable qPCR results in the field? Bring MI on location using our new FieldQuant™ device. This portable qPCR instrument can provide actionable data within 24 hours by performing the analysis on site or in your hotel room after a day of sampling. This allows decisions to be made in real time using MI’s own highly validated assays that you already use and love. In addition, the remaining DNA will be sent back to the laboratory for long term preservation and archiving, allowing you to analyze for additional qPCR targets even a year down the road. Learn More
Manufacturing
Remediation Products
For more information call a service expert at 865-573-8188 or email us at [email protected].
QuantArray® - Petro
The QuantArray®-Petro can simultaneously detect and quantify over 20 different gene targets related to petroleum hydrocarbon degradation within a single sample. Because the suite includes gene targets responsible for both aerobic and anaerobic biodegradation of BTEX, PAHs, and a variety of short and long chain alkanes, it helps to remove any guesswork in site cleanup decision making. Learn More
QuantArray®-Chlor
QuantArray®-Chlor quantifies key microorganisms (e.g., Dehalococcoides, Dehalobacter, etc.) and functional genes (e.g., vinyl chloride reductase, methane monooxygenase, etc.) to assess potential for reductive dechlorination and aerobic cometabolism of a range of chlorinated solvents. Learn More
Corrosion Services
For more information call a service expert at 865-573-8188 or email us at [email protected].
QuantArray®-MIC
Protect your assets and prevent MIC using QuantArray®-MIC, an advanced qPCR method which quantifies key microorganisms and functional genes responsible for MIC and oilfield souring in a single analysis. Learn More
Next Generation Sequencing (NGS)
Next Generation Sequencing (NGS) offers unprecedented insight into the potential for microbiologically influenced corrosion (MIC) and is especially powerful for monitoring community shifts before and after biocide treatments. Combined with QuantArray®-MIC, deep insight can be gained into corrosion threat assessment and protection. Learn More
Remote Sampling
For more information call a service expert at 865-573-8188 or email us at [email protected].
Bio-Extract™
When collecting samples, location is an important point to consider. Whether that location is a contaminated groundwater well, a pipeline segment or an asset which is miles from the nearest shoreline, you need to be able to get reliable, actionable data to help you make mission critical decisions. With Bio-Extract™, field crews can extract on site preserving the integrity of the sample, eliminating hold time considerations, and reducing the overall cost of sample collection and shipping. Learn More
FieldQuant ™
Would you like to have reliable qPCR results in the field? Bring MI on location using our new FieldQuant™ device. This portable qPCR instrument can provide actionable data within 24 hours by performing the analysis on site or in your hotel room after a day of sampling. This allows decisions to be made in real time using MI’s own highly validated assays that you already use and love. In addition, the remaining DNA will be sent back to the laboratory for long term preservation and archiving, allowing you to analyze for additional qPCR targets even a year down the road. Learn More
Agriculture
Agriculture Products
For more information call a service expert at 865-573-8188 or email us at [email protected].
CENSUS®
Nutrients and Plant Growth Promoting Rhizobacteria (PGPR) For absolute quantification of microorganisms or functional genes responsible for processes in the nitrogen cycle including nitrogen fixation, nitrification, and denitrification, including Nitrogen Fixing Bacteria (NIF), Ammonia Oxidizing Bacteria (AMO), and Denitrifying Bacteria (DNF). Learn More
QuantArray®-Ag
Maximize success, keep productivity high and costs contained by using QuantArray®-Ag to understand the organisms involved in nutrient and mineral cycling within the soil. Combine these results with traditional soil health testing for powerful interpretation. Learn More
Next Generation Sequencing (NGS)
In agriculture and land management, next generation sequencing (NGS) is especially powerful for tracking community shifts related to soil health. Learn More
Phospholipid Fatty Acid Analysis (PLFA)
This ratio has been linked to overall soil health, carbon cycling, and nutrient usage. In general, higher soil fertility with fewer disturbances results in a higher percentage of fungal biomass. Phospholipid Fatty Acid (PLFA) analysis provides a reliable F:B biomass ratio for soil samples. Learn More Learn More
Remote Sampling
For more information call a service expert at 865-573-8188 or email us at [email protected].
Bio-Extract™
When collecting samples, location is an important point to consider. Whether that location is a contaminated groundwater well, a pipeline segment or an asset which is miles from the nearest shoreline, you need to be able to get reliable, actionable data to help you make mission critical decisions. With Bio-Extract™, field crews can extract on site preserving the integrity of the sample, eliminating hold time considerations, and reducing the overall cost of sample collection and shipping. Learn More
FieldQuant ™
Would you like to have reliable qPCR results in the field? Bring MI on location using our new FieldQuant™ device. This portable qPCR instrument can provide actionable data within 24 hours by performing the analysis on site or in your hotel room after a day of sampling. This allows decisions to be made in real time using MI’s own highly validated assays that you already use and love. In addition, the remaining DNA will be sent back to the laboratory for long term preservation and archiving, allowing you to analyze for additional qPCR targets even a year down the road. Learn More
Municipal
Tourism and Recreation
For more information call a service expert at 865-573-8188 or email us at [email protected].
Microbial Source Tracking (MST)
Use CENSUS qPCR assays to identify the host associated with fecal contamination of surface waters. Learn More
Wastewater Services
For more information call a service expert at 865-573-8188 or email us at [email protected].
CENSUS®
Identify the root cause of your wastewater plant’s performance issues using CENSUS® qPCR to quantify key organisms and genes involved in the nitrogen cycle as well as organisms responsible for methane biogas generation. Learn More
Landfill
For more information call a service expert at 865-573-8188 or email us at [email protected].
Assay Design
As microbiology continues to play an increasingly important role across all industries, it’s often necessary to detect and quantify specific gene targets. Depending on the industry and application, Microbial Insights offers qPCR assay design as a service – we’ll work with you to develop the assay and then offer the target analysis through our DNA laboratory. If you need a qPCR assay developed, please reach out to [email protected] and our research and development department will get in touch. Learn More
Metagenomics
Use whole genome shotgun metagenomics to gain insight into “What microorganisms are present?” and “What are they capable of doing?”. This is a powerful tool for researching microbial applications for emerging contaminants. Learn More
Remote Sampling
For more information call a service expert at 865-573-8188 or email us at [email protected].
Bio-Extract™
When collecting samples, location is an important point to consider. Whether that location is a contaminated groundwater well, a pipeline segment or an asset which is miles from the nearest shoreline, you need to be able to get reliable, actionable data to help you make mission critical decisions. With Bio-Extract™, field crews can extract on site preserving the integrity of the sample, eliminating hold time considerations, and reducing the overall cost of sample collection and shipping. Learn More
FieldQuant ™
Would you like to have reliable qPCR results in the field? Bring MI on location using our new FieldQuant™ device. This portable qPCR instrument can provide actionable data within 24 hours by performing the analysis on site or in your hotel room after a day of sampling. This allows decisions to be made in real time using MI’s own highly validated assays that you already use and love. In addition, the remaining DNA will be sent back to the laboratory for long term preservation and archiving, allowing you to analyze for additional qPCR targets even a year down the road. Learn More
R&D
Assay Design Products
For more information call a service expert at 865-573-8188 or email us at [email protected].
Assay Design
As microbiology continues to play an increasingly important role across all industries, it’s often necessary to detect and quantify specific gene targets. Depending on the industry and application, Microbial Insights offers qPCR assay design as a service – we’ll work with you to develop the assay and then offer the target analysis through our DNA laboratory. If you need a qPCR assay developed, please reach out to [email protected] and our research and development department will get in touch. Learn More
Metagenomics
Use whole genome shotgun metagenomics to gain insight into “What microorganisms are present?” and “What are they capable of doing?”. This is a powerful tool for researching microbial applications for emerging contaminants. Learn More
Remote Sampling
For more information call a service expert at 865-573-8188 or email us at [email protected].
Bio-Extract™
When collecting samples, location is an important point to consider. Whether that location is a contaminated groundwater well, a pipeline segment or an asset which is miles from the nearest shoreline, you need to be able to get reliable, actionable data to help you make mission critical decisions. With Bio-Extract™, field crews can extract on site preserving the integrity of the sample, eliminating hold time considerations, and reducing the overall cost of sample collection and shipping. Learn More
FieldQuant ™
Would you like to have reliable qPCR results in the field? Bring MI on location using our new FieldQuant™ device. This portable qPCR instrument can provide actionable data within 24 hours by performing the analysis on site or in your hotel room after a day of sampling. This allows decisions to be made in real time using MI’s own highly validated assays that you already use and love. In addition, the remaining DNA will be sent back to the laboratory for long term preservation and archiving, allowing you to analyze for additional qPCR targets even a year down the road. Learn More
Ready to get started?
Contact an Expert
Problem
Contamination
Fecal Contamination Products
For more information call a service expert at 865-573-8188 or email us at [email protected].
Microbial Source Tracking (MST)
Use CENSUS qPCR assays to identify the host associated with fecal contamination of surface waters. Learn More
Petroleum Services
For more information call a service expert at 865-573-8188 or email us at [email protected].
QuantArray® - Petro
The QuantArray®-Petro can simultaneously detect and quantify over 20 different gene targets related to petroleum hydrocarbon degradation within a single sample. Because the suite includes gene targets responsible for both aerobic and anaerobic biodegradation of BTEX, PAHs, and a variety of short and long chain alkanes, it helps to remove any guesswork in site cleanup decision making. Learn More
Stable Isotope Probing (SIP)
In a single test, conclusively determine whether in situ biodegradation of a specific contaminant has occurred. A Bio-Trap® amended with a 13C “labeled” contaminant (e.g., 13C benzene) is deployed in an impacted monitoring well and the label can be detected in the end products of biodegradation – microbial biomass and CO2. Learn More
QuantArray®-NSZD
Within a single analysis, QuantArray®-NSZD quantifies over 20 different gene targets related to the microorganisms, processes and enzymes involved in Natural Source Zone Depletion of light non-aqueous phase petroleum hydrocarbons. Learn More
Bio-Trap®
Bio-Trap® samplers are passive sampling tools that collect microbes over time for a better understanding of biodegradation potential. Bio-Traps® are only sold with analysis and can be analyzed for any molecular biological tool available at MI. Learn More
In Situ Microcosm Studies (ISM)
Results from laboratory microcosms do not always correlate to the field and pilot studies are too expensive to be used to screen multiple remediation approaches. In Situ Microcosms (ISMs) are field deployed microcosm units providing a multiple lines of evidence approach to remediation options evaluation. Learn More
Chlorinated Solvents Services
For more information call a service expert at 865-573-8188 or email us at [email protected].
QuantArray®-Chlor
QuantArray®-Chlor quantifies key microorganisms (e.g., Dehalococcoides, Dehalobacter, etc.) and functional genes (e.g., vinyl chloride reductase, methane monooxygenase, etc.) to assess potential for reductive dechlorination and aerobic cometabolism of a range of chlorinated solvents. Learn More
DHC + Functional
Use CENSUS® qPCR as an indispensable component of site assessment, remedy selection, and performance monitoring at chlorinated solvent sites around the world. Measure Dehalococcoides mccartyi to verify the potential for complete anaerobic dechlorination of chlorinated ethene compounds to ethene. Learn More
QuantArray®-BGC
In a single analysis, QuantArray®-BGC quantifies a broad spectrum of microorganisms and genes involved in biogeochemical processes related to the redox ladder and mineral cycling. Identify the potential for the in situ formation of minerals that abiotically degrade the contaminants of concern. Learn More
Min-Trap®
Use the Min-Trap® sampler to cost-effectively collect direct mineralogical data passively without the need to drill for soil samples. Monitor the formation of reactive iron minerals for abiotic degradation of chlorinated solvents or determine the area of impact from a zero-valent iron injection. Learn More
Bio-Trap®
Bio-Trap® samplers are passive sampling tools that collect microbes over time for a better understanding of biodegradation potential. Bio-Traps® are only sold with analysis and can be analyzed for any molecular biological tool available at MI. Learn More
In Situ Microcosm Studies (ISM)
Results from laboratory microcosms do not always correlate to the field and pilot studies are too expensive to be used to screen multiple remediation approaches. In Situ Microcosms (ISMs) are field deployed microcosm units providing a multiple lines of evidence approach to remediation options evaluation. Learn More
1,4 Dioxane Services
For more information call a service expert at 865-573-8188 or email us at [email protected].
Census®
Use this qPCR tool to track 4 different genes related to the degradation of 1,4-Dioxane, letting you know if the potential for cometabolic degradation of 1,4 dioxane is present at this location. Learn More
Stable Isotope Probing (SIP)
In a single test, conclusively determine whether in situ biodegradation of a specific contaminant has occurred. A Bio-Trap® amended with a 13C “labeled” contaminant (e.g., 13C 1,4-dioxane) is deployed in an impacted monitoring well and the label can be detected in the end products of biodegradation – microbial biomass and CO2. Learn More
Bio-Trap®
Bio-Trap® samplers are passive sampling tools that collect microbes over time for a better understanding of biodegradation potential. Bio-Traps® are only sold with analysis and can be analyzed for any molecular biological tool available at MI. Learn More
PFAS Services
For more information call a service expert at 865-573-8188 or email us at [email protected].
Next Generation Sequencing (NGS)
For emerging contaminants like PFAS that don’t have associated gene targets, next generation sequencing (NGS) can be useful for identifying and monitoring community shifts in impacted versus unimpacted locations demonstrating how the selective pressure of the contaminant influenced the microbial community. Learn More
Bio-Trap®
Bio-Trap® samplers are passive sampling tools that collect microbes over time for a better understanding of biodegradation potential. Bio-Traps® are only sold with analysis and can be analyzed for any molecular biological tool available at MI. Learn More
Corrosion
Corrosion Products
For more information call a service expert at 865-573-8188 or email us at [email protected].
QuantArray®-MIC
Protect your assets and prevent MIC using QuantArray®-MIC, an advanced qPCR method which quantifies key microorganisms and functional genes responsible for MIC and oilfield souring in a single analysis. Learn More
Next Generation Sequencing (NGS)
Next Generation Sequencing (NGS) offers unprecedented insight into the potential for microbiologically influenced corrosion (MIC) and is especially powerful for monitoring community shifts before and after biocide treatments. Combined with QuantArray®-MIC, deep insight can be gained into corrosion threat assessment and protection. Learn More
Reservoir Souring
Reservoir Souring Products
For more information call a service expert at 865-573-8188 or email us at [email protected].
QuantArray® - MIC
Protect your assets and prevent MIC using QuantArray®-MIC, an advanced qPCR method which quantifies key microorganisms and functional genes responsible for MIC and oilfield souring in a single analysis. Learn More
CENSUS®
Protect your investment by using CENSUS® qPCR to understand or prevent souring of your well. This method quantifies specific bacteria and archaea responsible for souring such as sulfate reducing bacteria and sulfate reducing archaea. Include targets like nitrate reducing bacteria when combating souring with nitrate injections. Learn More
Next Generation Sequencing (NGS)
In reservoir souring, Next Generation Sequencing (NGS) is powerful for detecting and tracking key genera related to souring as well as monitoring souring mitigation efforts. Learn More
Soil Health
Soil Health Products
For more information call a service expert at 865-573-8188 or email us at [email protected].
CENSUS®
Nutrients and Plant Growth Promoting Rhizobacteria (PGPR) For absolute quantification of microorganisms or functional genes responsible for processes in the nitrogen cycle including nitrogen fixation, nitrification, and denitrification, including Nitrogen Fixing Bacteria (NIF), Ammonia Oxidizing Bacteria (AMO), and Denitrifying Bacteria (DNF). Learn More
QuantArray®-Ag
Maximize success, keep productivity high and costs contained by using QuantArray®-Ag to understand the organisms involved in nutrient and mineral cycling within the soil. Combine these results with traditional soil health testing for powerful interpretation. Learn More
Next Generation Sequencing (NGS)
In agriculture and land management, next generation sequencing (NGS) is especially powerful for tracking community shifts related to soil health. Learn More
Phospholipid Fatty Acid Analysis (PLFA)
This ratio has been linked to overall soil health, carbon cycling, and nutrient usage. In general, higher soil fertility with fewer disturbances results in a higher percentage of fungal biomass. Phospholipid Fatty Acid (PLFA) analysis provides a reliable F:B biomass ratio for soil samples. Learn More Learn More
Remote Sampling
Remote Sampling
For more information call a service expert at 865-573-8188 or email us at [email protected].
Bio-Extract™
When collecting samples, location is an important point to consider. Whether that location is a contaminated groundwater well, a pipeline segment or an asset which is miles from the nearest shoreline, you need to be able to get reliable, actionable data to help you make mission critical decisions. With Bio-Extract™, field crews can extract on site preserving the integrity of the sample, eliminating hold time considerations, and reducing the overall cost of sample collection and shipping. Learn More
FieldQuant ™
Would you like to have reliable qPCR results in the field? Bring MI on location using our new FieldQuant™ device. This portable qPCR instrument can provide actionable data within 24 hours by performing the analysis on site or in your hotel room after a day of sampling. This allows decisions to be made in real time using MI’s own highly validated assays that you already use and love. In addition, the remaining DNA will be sent back to the laboratory for long term preservation and archiving, allowing you to analyze for additional qPCR targets even a year down the road. Learn More